KWIK-E-VAC Line Set Flushing Kit Installation Simplifier for Mini Split A/C

Description

Air Conditioning
Superstore
Home
Ductless
Multi-Zone
Ducted
Accessories
Now
Free Shipping
For any order within Continental US!
ACCESSORIES
KWIK-E-VAC Line Set Flushing Kit Installation Simplifier for Mini Split Air Conditioning Systems
SUMMARY
Flush the air and other non-condensable gases out of the copper line set and indoor unit.
Alternative for the inefficient and expensive quick-connect line sets .
Cost-effective, simple, and quick evacuation.
Perfect for most people and installations.
Description
Pioneer KWIK-E-VAC is an all-new, revolutionary, patented kit designed to simplify the installation process. This product is intended to provide an alternative to a vacuum pump, a tool that was previously required to install mini splits.
KWIK-E-VAC works by flushing the air and other non-condensable gases out of the copper line set and indoor unit combination, in order to ensure that the refrigerant in the system remains contaminant-free. In order to bleed the lines of any air and check for leaks, a vacuum pump and pressure gauges were previously needed. This kit allows the user to bypass that step, making any mini-split system truly DIY.
Use this as an alternative for the inefficient and expensive quick-connect line sets, which reduce system efficiency and capacity, and cost 10 times more than the cost of this kit. A cost-effective, simple, and quick evacuation, perfect for most people and installations.
Directions of use:
This kit provides an
alternative way to install a split air conditioner
, if a proper vacuum pump is not available for the evacuation of the line sets. See below instructions, only to replace the specific section in the installation manual covering the use of a vacuum pump for evacuation. Follow all remaining instructions in the manual as originally written.
Read all safety instructions above and wear protective gear as suggested.
Keep the metal can upright at all times while using. Do not tilt or tip.
Ensure the electrical power to entire equipment is switched off at the main breaker.
Indoor section of the air conditioner: Connect both copper pipes of the line set to the indoor unit properly and as instructed in the equipment installation manual, using proper torque, methods, and materials approved by the equipment manufacturer.
Outdoor section of the air conditioner: Connect ONLY THE GAS SIDE copper pipe (one with larger diameter) to the GAS side service valve of the outdoor unit properly and as instructed in the equipment installation manual, using proper torque, methods and materials approved by the equipment manufacturer. Do not connect the LIQUID SIDE copper pipe (one with smaller diameter) at this time, until instructed further below.
Connect the end connector of hose of the purging kit to the SERVICE PORT on the GAS SIDE SERVICE VALVE of the outdoor unit tightly. Pay attention to prevent valve damage.
Turn the valve on the flushing kit can tap valve clockwise, reaching all the way down.
You should hear the flow of flushing material flowing into the GAS side of the copper line set and then flowing out freely at unconnected pipe end of the LIQUID side of the copper line set near the outdoor unit. Once flow is confirmed, close the tap valve, then open again for 5 seconds at a time, repeating until about 2/3 of contents in the can are used up. Close the tap valve of the can. (Valve turns CW to open and CCW to close).
If no flow of the material is noticed when first opened, close the flushing kit tap valve, disengage the hose connector from the service port, and adjust the depressor inside the hose connector outward by 1 or 2 turns, and repeat the steps 5 through 7 above.
Now it is time to quickly connect LIQUID SIDE copper pipe (one with smaller diameter) to the LIQUID side service valve of the outdoor unit properly and as instructed in the equipment installation manual, using proper torque, methods and materials approved by the equipment manufacturer. At this stage all 4 pipe connectors are tightly connected.
Open the tap valve again and release the remaining material in the can into the system until contents are entirely used up. Disconnect the hose from the service port of the unit.
Using soapy bubbles spray, carefully check all 4 pipe connections for leaks. If the leaks are present, tighten, adjust, or repair the connection to stop any leaks, and repeat evacuation.
While the purging hose remains attached to the service port, unscrew the tap valve from the top of the canister to release all remaining gas pressure, and wait until all purging material pressure is entirely released. Disconnect the hose from the service port.
Follow the installation instructions provided by the equipment manufacturer for the next steps, such as opening the service valves to release the refrigerant, other verifications, and further startup procedures. For multi-zone systems, use one kit for each zone.
WARNING for California residents only:
This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Warning: Use only as directed. Read label instructions carefully.
Keep out of reach of children. Intentional misuse by deliberately concentrating and/or inhaling contents may be fatal. Vapors are heavier than air and may spread along floors. Avoid breathing vapors or mist. Avoid contact with skin, eyes, and clothing. Provide sufficient air exchange and /or exhaust in work areas. Handle in accordance with good industrial hygiene and safety practice. THIS PRODUCT IS FOR OUTDOOR USE ONLY.
Contains gas under pressure, may explode if heated. Flammable gas. Do not spray on an open flames or other ignition sources. Keep away from heat. Vapors may form flammable mixture with air. The products should only be used in areas from which all sources of ignition have been excluded. Electrical equipment should be protected to the appropriate standard. No sparking tools should be used. Take measures to prevent the build-up of electrostatic charge. Keep away from open flames, hot surfaces, and sources of ignition. When using DO NOT SMOKE. Disconnect the electrical power to the equipment.
Pressurized container: Do not pierce or burn, even after use. Do not store in enclosed vehicles. Protect from sunlight. Store in a well-ventilated place. Store at temperatures not exceeding 120 degrees F / 49 degrees C. Keep container tightly closed and in a dry and well-ventilated location. Store in original container. The product has and indefinite shelf life when stored properly.
Ensure adequate ventilation, especially in confined areas. Use respiratory protection if needed. Wear safety glasses with side shields. Direct contact with liquid may cause frostbite. Wear proper protective gloves when using.
Contains: 1,1-Difluoroethane which has zero ozone depletion potential and a very low global warming potential. See MSDS for additional safety information at
https://www.pdhvac.com
TERMS OF SALE
Equipment we sell is made using advanced technologies. Therefore they need to be installed and maintained properly and professionally. Installation requires certain specific tools and knowledge and must be performed by trained technicians. Certain electrical and refrigeration work needed for the installation is regulated by laws and codes, federally and locally, which may vary for each locality and state. Improperly installed equipment may raise serious safety concerns as well as performance deficiencies. Please be advised that we will not be liable for any harm, damages or injuries to property or persons, caused by the equipment we sell, under any circumstances.
We realize some buyers are highly qualified to perform some or most of the tasks involved in the installation process. In fact, certain processes in installation may be performed by someone handy to reduce the amount of work left to be done by technicians and therefore save on the hired labor costs. We advise everyone to check clearly and adhere to all laws, codes and regulations and limit their involvement in the installation to only such areas that do not require a license or permit. To perform other tasks, which require a license or permit, please hire properly qualified technicians. For Detailed Installation Instructions, please check our Installation Instructions.
Once shipped the equipment is generally non-returnable. Please contact us for returns if required for certain reasons beyond your control within maximum 14 days. If we agree, we will issue an RMA number and other instructions to return the equipment. Returned equipment is to be shipped freight prepaid by the buyer and must be re-packed in its original condition and in its original packaging. Additionally, we will refund only the purchase price minus all original freight costs, EBay fees, PayPal or credit card charges and 20% restocking fee. PLEASE NOTE; AFTER IT IS INSTALLED, THE EQUIPMENT IS NOT RETURNABLE.
We reserve the right to cancel any order for any reason. In such cases, if a payment has already been sent, it will be fully refunded immediately.
SHIPPING
We only ship to the 48 contiguous United States. No shipments to APO/FPO addresses, AK, HI, PR or other US Territories. No international shipments. Due to the size and the weight of our equipment, we can only utilize well known freight companies for shipping. Each shipment will be paletized, strapped down and wrapped in stretch film to protect against damages during transit. Upon arrival you may ask the driver to break down the palette into individual cartons to unload the goods from the truck easily. We generally do not offer Lift Gate service. This will arrive as curb side delivery. Trucker will need assistance in unloading the goods from the truck to ground level. If you must have Lift Gate service, there may be an additional charge which needs to be paid separately. We also allow free pickup from our main distribution warehouse, located in Miami area. Equipment we sell is not suitable for express or courier shipping because of their weight as well as high risk of damages.
We prepare each shipment within 24 hours after the receipt of payment (only during weekdays). Trucking companies usually pick up same day or a day after we call them that the shipment is ready. The transit may take any time between 3 to 6 business days and in rare cases up to 10 days. We will provide tracking information after shipment. Please contact us in case of any shipment delays.
CHECK YOUR EBAY RECORD CAREFULLY TO SUBMIT THE CORRECT DELIVERY ADDRESS, UPDATED EMAIL AND A VALID PHONE NUMBER
with your order. Someone must be present to receive the cargo at the time of delivery. Delivery company will call your phone number to setup a delivery appointment for residential deliveries. If your phone number is not valid, the cargo can not be delivered and will be returned at your expense within 3 days of arrival. If the delivery is refused or can not be delivered, it will be handled as returned merchandise
Upon arrival, count all cartons and compare with the number stated on the delivery receipt before signing. Open the cartons and inspect the goods carefully for any damages. All products have been inspected under strict ISO regulated facilities and leave our warehouse in perfect condition. Report any shipping damages to the freight carrier on the delivery receipt and file a claim. Also contact us with the description of damages and pictures, etc. Although rare, certain freight damages can occur and we are here to help. We carry all necessary replacement and service parts and components in large quantities and make them available during and after the warranty period.
PAYMENTS
We gladly accept PayPal payments. You can use PayPal and pay with a credit card, even if you are not a member of PayPal. On the special instructions area, please assure to enter your phone number, enter any other specific requirements pertaining to your delivery (valid phone number is required for the delivery driver). If you have any problem about paying, please inform us and we will try to assist you with other payment options. If the delivery address is within the State of Florida or if the shipment will be picked up by the buyer, we are required by the State of Florida to charge sales tax, equivalent to 7% of the equipment price.
WARRANTY
We offer 2 years limited warranty coverage on all equipment we sell against certain defects in materials and workmanship. In addition, we offer 5 years warranty on the compressor. This warranty is subject to certain conditions and requirements to be in force. The warranty registration form we ship with each unit must be filled out entirely as required and sent back to us for registration and verification of proper installation. Equipment that is not registered properly after installation will not be covered.  Certain fields on the warranty card need to be filled to contain certain operational or diagnostic measurements. For full details about our warranty policy, please check our Warranty Document or download the form in our company website.
FEEDBACK
We strive to serve our clients in the best way possible. In case of any dissatisfaction with our product or service, please contact us first and we will gladly look into ways of providing a remedy. Please leave a positive feedback for us after you receive your product and we will always do the same for you.
WARNING:
Customers from California must read the
California Proposition 65
at https://www.p65warnings.ca.gov/
Money Back
We offer 14 day moneyback guarantee on all purchases
Instant Savings
Wholesale Level Factory Direct Prices
Low price guarantee
We match any competitor's Lowest advertised price
Free support
Our staff is ready to help You at any moment, just contact us
ABOUT US
HighSEER is the online marketing subsidiary of Parker Davis HVAC International, Inc., which is one of the best known manufacturers and suppliers of HVAC equipment in world markets. Our headquarters office along with large warehousing and distribution facilities are located in Miami, Florida.
We have established distribution channels for our products in more than 100 countries located in all continents of the world. In total, we sell over 40,000 units each year and in certain countries our market saturation exceeds 50%.
CONTACT US
We are open Monday through Friday 8:30 AM to 5:00 PM Eastern Standard Time (excluding holidays).
Our headquarters building with the sales offices, showroom and distribution center is located at: 3250 NW 107th Ave, Doral, FL 33172 (Near Miami Free Zone at NW 25th Street and 107 Avenue).
All buyers are welcome to visit during business hours.